Heavy metals
Limit runoff and emissions of environmental toxins
Fill in your contact details and we'll be in touch.
Fanaveien 213 (vekten)
5239 Rådal
T: 55 11 87 50
E: post@fsg.no
FSG AS has permission for the landfill of contaminated materials in Stendafjellet.
Our landfill site is located between Bergen Airport, Flesland and Bergen city centre with a short distance to the nearest port.
We focus on reuse, sustainability and circular solutions, as well as the safe handling of contaminated soil.
Depot · Delivery information
A well-prepared delivery makes receiving easier. Here you will find the requirements for documentation, transportation, and types of waste.
Clear the delivery in writing at least one day in advance. Also let us know in good time if you need help with unloading.
Contaminated masses shall normally have representative analytical results delivered at least one day before the vehicle arrives at the weighbridge.
Any risks of odors, dust, or being wet must always be further clarified in writing at least one day before delivery. Specific delivery times and requirements for measures to ensure proper handling may be provided.
The customer is expected to be able to tip or unload themselves. Any need for assistance must be reported in good time. Unloading may incur a fee.
Vehicles that do not meet the requirements may be rejected or placed on hold until information and clearance are available. FSG visually checks the loads during registration and emptying. Deviations from the basic characteristics or submitted analyses, also detected by spot checks, may result in rejection, a deviation fee, or a cleanup fee.
The lack of sampling may result in additional fees for necessary tests. This also applies to several relevant pollution parameters, such as oil, PCBs, and PFAS, which should have been investigated based on known activity in the area.
Basic characterization is the responsibility of the waste producer under Chapter 9 of the Waste Regulations, Annex II. The documentation must ensure that the receiving facility only accepts waste for which it has permission, and that the waste is handled correctly. Requirements for sampling may follow from the Waste Regulations or the Pollution Control Act.
Find your waste type
Open the waste type to see the delivery requirements.
Waste code 1604 · EAL 170504 · Item code 01-170504
FSG accepts clean and contaminated soil and gravel masses. Contaminated masses have concentrations above the standards set by the pollution regulations or exceed the condition class 1 according to the Directorate of Environmental Protection’s guide for contaminated soil. We cannot accept hazardous waste or mud-like masses.
Soil and gravel can be suitable for the washing plant. This requires basic characterization and a submitted form, representative sampling in accordance with applicable regulations, and a report on the sampling site with a description of the variation in the level of contamination.
NS 1611 / 1612 · Item code 01-170101-01 / 01-170101-02
Concrete without reinforcement is supplied under NS 1611, item code 01-170101-01. Concrete with reinforcing bars is supplied under NS 1612, item code 01-170101-02.
A basic characterization form is required. Analyses are not required as long as necessary information ensures that this is not hazardous waste.
Hardened cement is supplied as concrete without reinforcement wire. Unhardened cement can only be received in bigbags, original packaging or equivalent.
NS 1613 · Item code 01-170102 / 01-170103
Clean roof tiles and bricks of brick that can be recycled, and untreated concrete free of plaster, paint and other contamination, are supplied under item code 01-170102. Various concrete roof tiles, glazed concrete roof tiles and slate that cannot be recycled are supplied under item code 01-170103.
A basic characterization form is required. Consider and provide information about whether the roof tiles or brick walls may have been exposed to polluting activity. FSG has mapped several types of roof tiles made of brick that can normally be recycled.
NS 1614 · Item code 01-170107-01 / 01-170107-02
Contaminated mixed waste of concrete and bricks is supplied under item code 01-170107-01. Pipestone with PAH that is not hazardous waste is supplied under its own item code 01-170107-02.
NS 1618 · Item code 01-170107-03
Ceramics and porcelain can include, among other things, toilets, trays, cups and plates.
A basic characterization form is required. Remove any parts that are not porcelain before delivery, including toilet seats, pipe parts, basin faucets, and other metals.
NS 9916 · Item code 01-200303
Waste materials from cleaning costs and street cleaning without residual waste.
Basic characterization forms and analyses are required. The masses must be dewatered. Delivery must always be further clarified in writing at least one day in advance for proper handling upon receipt.
NS 1672 · Item code 01-120117
Sand used for sandblasting steel, stone and concrete surfaces. FSG cannot accept blown sand that is hazardous waste.
Basic characterization forms and analyses are required. Without direct analyses, the masses shall be considered hazardous waste and will be rejected.
Blown sand may be dusty. Delivery must be further agreed upon in writing at least one day before delivery for proper handling upon receipt.
We require analyses of all aggregates
Do you have any questions about your test results? We can help interpret analyses.
Limit runoff and emissions of environmental toxins
Limit dust, noise and gas emissions
Recyclable waste must not go to landfill
